TT-120 Fill Flex

EXTRA FILLING PRIMER AND ADHESION PROMOTOR

Adhesion promotor, extra filling primer and elastizer.

Perfect adhesion on most hard materials, without the use of an adhesion primer.

With width control in the spray head.

Product description

TT-120 Fill Flex has a very high flexibility despite its very good filling capacity. Ideal for carrying out economically small repairs and three basic colors available for an easier paint finish. Fill Flex has a fine top layer which facilitates the finish, less sanding. Fill Flex is suitable for accelerated drying with infrared.

Specifications

TT-120 Fill Flex

EXTRA FILLING PRIMER AND ADHESION PROMOTOR

  • Drying time at 20°C: hand-dry after 15 min. (50 micron film).
  • Colour: white, dark grey, red, blue, anthracite.
  • Consumption:
    • 1 full covering layer = 233 gr/m²
    • 1 full filling layer = 333 gr/m²
  • Nozzle: adjustable in narrow horizontal or wide vertical shape.
  • Max. temperature resistance: 120°C.
  • Shelf life: 24 months, keep dry, cool and frost-proof.
  • Safety measures: consult the Safety Data Sheet.

Application

  • Thanks to the good bond on most plastics, Fill Flex is perfect to use on spoilers, bumpers, wheel covers, decorative covers of outside mirrors,... .
  • Also very suitable for galvanised parts, white metals, old paints, ferrous and non-ferrous metals, ... .

Technical information

Technical data sheet

Available packages & colors

  • 120712118 - TT-120 Fill Flex grey - aerosol 500ml
  • 120722118 - TT-120 Fill Flex black - aerosol 500ml

Instructions

  • After relasing the mixing ball, shake well before use.
  • Sand the surface and clean and degrease with TT-101Sikker Afrens FS and/or TT-1004 Multifoam.
  • Apply TT-120 Fill Flex in a serie of thin layers, allowing a brief drying period between layers.
  • Once dry (20 min) sand before applying paint. Sanding may be done dry (500 grit) or wet (800 grit).
  • Empty the nozzle spraying with the can upside down.

After drying (+/- 15 minutes), Novafill Flex 2 can be sanded (both wet and dry). Can be painted over after 2 hours with the most common paints. With plastics that contain PE or PP, Fill Flex 2 may have less good or even poor adhesion. The use of TT-229 Seal & Bond Special Primer can considerably improve adhesion.