TT-1022 Nano Beskyttelse

WATER REPELLENT, DURABLE PROTECTION FOR ALL POROUS MATERIALS AND TEXTILES

Protects against oil, grease, dirt, pollution…

For indoor and outdoor use.

Colourless, odourless and safe.

Vapor permeable.

tt1022c-nano-beskyttelse-5l

Product description

  • Nano Beskyttelse prevents the infiltration of dirt and moisture into porous materials and textiles.
  • This durable protection against frost, slows discolouration due to UV radiation and works against moss and mould formation.
  • Nano Beskyttelse improves thermal insulation by 30% and makes woven fabrics more durable.
  • Ready for use, contains no solvents and is not flammable.

Specifications

tt1022c-nano-beskyttelse-5l

TT-1022 Nano Beskyttelse

WATER REPELLENT, DURABLE PROTECTION FOR ALL POROUS MATERIALS AND TEXTILES

  • Form: liquid.
  • Odour: weak, characteristic.
  • Melting point/Melting range: < 0°C.
  • Boiling point/Boiling point range: > 100°C.
  • Auto ignition: no.
  • Explosion hazard: none.
  • Vapour pressure at 20°C: approx. 23 hPa.
  • Density at 20°C: approx. 1.07 g/cm³.
  • Solubility in/Miscibility with water: complete.
  • pH value at 20°C: +/- 6.
  • Shelf life: 12 months, dry, cool and frost free.

Technical information

Technical data sheet

Available packages & colors

  • 486305118 - TT-1022 Nano Beskyttelse - can 5L
  • 486320118 - TT-1022 Nano Beskyttelse - can 20L

Instructions

  • Clean, rinse and dry the surface if necessary. (after cleaning and before treatment with Nano Beskyttelse, rinse and dry thoroughly).
  • Apply Nano Beskyttelse in an upward motion, from bottom to top, in two successive coats, wet on wet.
  • Allow to dry.

Apply with a brush or using a low-pressure pump fitted with a flat spray nozzle. The substrate’s temperature should be at least +5°C. Do not apply when it is raining or frosty. Make sure the work area is well ventilated and always wear a mask with type A filter during application. Dry in 24 hours, depending on substrate, temperature and amount applied. Maximum protection after 7 days. The equipment used can be directly cleaned with water. Immediately wipe off Nano Beskyttelse from window panes or frames with a damp cloth.

One litre of Nano Beskyttelse can treat a surface of between 2 and 10 m², depending on the porosity of the substrate.