TT-537 Seal & Bond MS Rudelim
ONE-COMPONENT ADHESIVE
Positive euro NCAP drive test after 1 hour.
Crashtest certificate FMVSS 212 after 1h with airbag.
Stable, high initial strength and torsional rigidity.
Very high tensile strength, without primer, on varnish, varnish, bare metals, aluminum, galvanized, ....
Product description
Seal & Bond MS Rudelim is a 1-component adhesive based on MS Polymers that hardens due to air humidity. Seal & Bond MS Rudelim requires no primer and dries quickly. Seal & Bond MS Rudelim has a high initial adhesion and an excellent permanent adhesion to varnishes, bare metals, glass, PVC, aluminum. Seal & Bond MS Rudelim has a high tensile strength and shows no signs of age. Easy removal of non hardened adhesive residues. Opened cartridge can be stored for a long time.
Specifications
TT-537 Seal & Bond MS Rudelim
ONE-COMPONENT ADHESIVE
- Basis: MS polymer.
- Colour: black.
- Relative density: 1.5g/m².
- Viscosity: paste.
- Shore hardness (DIN 53503): 50 Shore A after three weeks at 23 °C / 50% relative air humidity.
- Shrinkage (DIN52451): < 5%.
- Density (DIN EN 27390): non-sagging up to a 40 mm thick joint.
- Tensile strength at break: > 450%.
- Module at 100% strength: 1.0 N/mm2 23°C (DIN 53504 S2).
- Tensile strength (DIN 53504 S2): 2.3 N/mm².
- Skin formation: +/- 5 min.
- Tack free: after 24 hours 2.5 mm, after 48 hours 3.5 mm.
- Hardening speed: 6 hours at 23°C at R.V. of 50%.
- Temperature limits: from -40°C to 90 °C.
- Application temperature: lowest +5 °C – highest 40 °C.
- Chemical strength:
- good with water, seawater, aliphatic solvents, oils, grease, thinned organic acids and lyes;
- average: ester, ketone bodies and aromatics;
- poor: concentrated acids, chloride solvents;
- Storage life: 12 months, dry, cool and frostfree.
- Safety measures: please consult the safety data sheet.
Technical information
Technical data sheet
Available packages & colors
- 537396118 - TT-537 Seal & Bond MS Rudelim - cartridge 290ml
Instructions
- Remove at least a part of the old windscreen adhesive.
- Degrease the adhesive surface with TT-1014 Sikker Afrens FS and blow dry.
- Clean the windscreen with TT-1014 Sikker Afrens FS and TT-1004 Multifoam: spray, wipe with a cloth and wipe off with a cloth clean.
- Apply Seal & Bond MS Rudelim equally to the vehicle or on the window.
- Open the windows, place the windscreen press, correct and apply more pressure if necessary (within 2 minutes).