TT-419 Power Grip 409 2-K

2K PU FOR REPAIR AND BONDING

High filling capacity and unique adhesion.

Can be sanded, tapped or drilled very quickly.

tt419-power-grip-409-2-k-250ml-1024

Product description

Is a superstrong 2-component adhesive with long open working time to bond spoilers, panels, bumpers,... Power Grip 409 2-K is the ideal adhesive for universal repairs and bondings with a long working time. Power Grip 409 2-K approaches the strength and flexibility of synthetic materials. Power Grip 409 2-K can be sanded quickly, both on thin and thick layers. Power Grip 409 2-K is suitable as both an adhesive and repair system.

Specifications

tt419-power-grip-409-2-k-250ml-1024

TT-419 Power Grip 409 2-K

2K PU FOR REPAIR AND BONDING

  • Basis: polyurethane.
  • Smell: typical.
  • Color after mixing: black.
  • Mixing time (23°C): 5 minutes.
  • Acting time (23°C): 8 to 10 minutes.
  • Can be sanded/manipulated: after 60 minutes.
  • Can be painted on: after 2 hours.
  • Elastic strength (%): 80%.
  • Tensile strength: 2620 N/cm².
  • Shear strength: 1378 N/cm².
  • Temperature resistance: 90°C continuous.
  • Adherence: very good adherence to most plastics, polyesters, ferrous and non-ferrous metals, enamels and varnishes surpasses the cohesion of surfaces such as concrete, stone, wood,...; more than 2N/mm² on metals (practical calculated value).
  • Chemical resistance: resistant to many acids, alkalis, oils, greases, petrol, heating oil, many solvents, salt solutions, aggressive vapours and sea air,...; not resistant to strong solvents.
  • Hardening: no shrinkage.
  • Min. processing temperature: 8°C.
  • Electrical resistance > 109Ohm.
  • Solids content: 100%.
  • Shelf life: 24 months, keep dry, cool and frost-free.
  • Safety measures: consult the Safety Data Sheet.

 

 

Application

Automotive:

  • gluing ferrous and non-ferrous metals, repairing damaged screw thread, nonweldable engine components such as ALU, zamac, ... .
  • sealing antenna holes, ... .

 

Industry:

  • repairing non-weldable machine and engine components.
  • repairs of sliding and pin tracks.
  • repairs of split rotors or blades of ventilators and pumps.
  • repairing pump houses and butterfly valves.
  • gluing ferrous and non-ferrous metals.

Technical information

Technical data sheet

Available packages & colors

  • 590419118 - TT-419 Power Grip 409 2-K - cartridge 250ml

Instructions

Substrate preparation

  • Clean with TT-1014 Sikker Afrens FS and/or TT-1004 Multifoam.
  • Sand the material.
  • Remove all dust.
  • Degrease with Sikker Afrens FS and Multifoam.
  • Blow dry.

 

Cartridge preparation

  • Remove the cap from the cartridge.
  • Place the cartridge in the gun.
  • Pump until both components flow out of the cartridge.
  • Place the mixer tip on the cartridge and, if necessary, cut off the nozzle to enlarge the opening.
  • First spout out 2 cm of product.
  • Apply on a clean and dry substrate.
  • Place a new mixer tip after a 5-minute break.

 

Storage

  • Remove mixer tip.
  • Clean cartridge.
  • Put cap back in place.

For a perfect finish (such as lacquering) we recommend applying a flexible plastic putty.